裝載機磨合期如何做好保護？

1、由于裝載機是特別車輛操作職員應接收生產廠家的培訓、領導，對機器的構造、性能有充足的懂得，并獲得必定的操作及維護經驗方可操作機器。生產廠家供給的產品使用保護解釋書，是操作者操作裝備的必備材料，在操作山東裝載機前，必定要先瀏覽使用保護闡明書，按闡明書的請求進行操作、頤養。
Because Shandong loader is operating staff should receive special vehicle manufacturer training, leadership, machine configuration, performance sufficient to understand and get a certain experience in operation and maintenance before

operating the machine. Manufacturers supply products to explain the use of protective book, the operator operates the equipment necessary materials before the operation Shandong loaders, must first clarify the use of protective browse

books, according to the request to clarify the operation of the book, take care of themselves.

2、注意裝載機磨合期的工作負荷，磨合期內的工作負荷一般不要超過額定工作負荷的80%，并要部署合適的工作量，防止山東裝載機長時光持續作業所引起的過熱現象的產生。
Note Shandong loader run-workload periods, running workloads period generally do not exceed 80% of the rated working load, and to deploy the appropriate workload, prevent Shandong loaders long time continuous operation due to

overheating phenomenon.

3、注意經常檢討裝載機潤滑油、液壓油、冷卻液、制動液以及燃油油(水)位和品德，并注意檢討裝載機的密封性。檢查中發明油水缺乏過多，應剖析原因。同時，應強化山東裝載機各潤滑點的潤滑，建議在磨合期內，每班都要對潤滑點加注潤滑脂。
Pay attention to regular review Shandong loaders lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) position and character, and pay attention to the review of Shandong loader seal. Check the lack of excessive water in the invention, it should analyze the reasons. At the same time, should strengthen lubricating Shandong loader lubrication points, it is recommended run-in period, the class should be greased for lubrication points.

4、堅持裝載機干凈，及時調劑、緊固松動的零部件，以防因松動而加劇零部件的磨損或導致零部件喪失。
Adhere to Shandong loaders clean, timely adjust and tighten loose parts, to prevent loose and cause increased wear of parts or components lost.

5、注意經常察看裝載機各儀表唆使，呈現異常，應及時停車予以消除，在原因未找到，故障未消除前，應結束作業。裝載機磨合期停止，應對機器進行強迫頤養，做好檢討和調劑工作，同時注意油液的調換。
Note that each instrument often look Shandong loaders instigation, showing abnormal, should be eliminated to stop in time, the reason is not found, the fault is not eliminated before the operation should be ended. Shandong loader run-in period to stop, take care of themselves forced to deal with the machine and do the review and adjustment of work, while paying attention to the oil exchange.