裝載機防治油液污染的措施

裝載機以柴油作為動力進行工作，油液的情況會直接影響到裝載機在工作時的動力效果，因此在給山東裝載機安裝時要格外注意油箱系統的安裝，防止出現油液污染，下面永保機械的專家教大家防止油液污染的安裝細則。

1、裝載機液壓泵的吸油口應安裝有粗濾器，并且吸油口距油箱底部要有一定的距離，這樣可以方便粗濾器作用的發揮。
Shandong loader hydraulic pump suction port shall be fitted with a strainer, and suction port from the bottom of the tank to have a certain distance, so you can easily play the role of a strainer.

2、裝載機出油口要安裝高壓精濾器，這樣過濾的效果才能夠符合系統的工作要求，起到防污物堵塞而導致液壓系統故障的作用。
Shandong Loader to install the high-pressure oil outlet fine filter, so that the effect of the filter to be able to meet the job requirements of the system, play a role in anti-fouling caused by clogging of hydraulic system failure.

3、裝載機液壓油箱的隔板應該加有過濾網，除去在回油過濾器中沒有濾去的雜質。
Shandong loaders hydraulic tank filter separator should be added, removed back to the oil filter does not filter out impurities.

4、裝載機液壓缸上應安裝金屬防護圈，以防污物被帶進缸內，并可防止泥水和光輻射對液壓缸侵蝕而引起泄漏;液壓元器件安裝前應檢查、清理干凈其內部的鐵屑及雜質。
Shandong loader should be installed on the hydraulic cylinder metal protective ring to prevent dirt being brought into the cylinder, and prevents mud and optical radiation leak caused by erosion of hydraulic cylinders; hydraulic components should be checked before installation, clean the inside of the iron debris and impurities.